Product ID:1 SHOT ACRYLIC GRAPHIC COAT
MSDS Date:04/04/1992
FSC:6850
NIIN:00F034277
MSDS Number: BTNFT

Emergency Phone: 219-949-1684

Info Phone: 219-949-1684

Cage: 13294

Telephone: 219-949-1684/800-424-9300(CHEMTREC)

Cage: 13294

1,2-PROPANEDIOL (PROPYLENE GLYCOL)

CAS: 57-55-6

RTECS: TY2000000

Fraction By Weight: 0-4%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATION TO EYES. MAY CAUSE ALLERGIC
SKIN/RESPIRATORY REACTION IN PEOPLE WHO ARE SENSITIVE TO ALLERGIC
POLYMERS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION
Medical Cond Aggravated by Exposure:SENSITIVITY TO ACRYLIC POLYMERS.

First Aid:INHALATION: REMOVE TO FRESH AIR/APPLY CPR IF NEEDED. EYES:
FLUSH W/PLENTY OF WATER FOR 15 MINS. SKIN: REMOVE EXCESS MATERIALS
W/PAPER TOWELS/RAGS. WASH W/MILD SOAP & WARM WATER. INGESTION:
DON'T INDUC E VOMITING. OBTAIN MEDICAL ATTENTION INALL CASES.

Lower Limits:0.7-1.0
Extinguishing Media:FOAM/CO2/DRY CHEMICAL
Fire Fighting Procedures:USE WATER SPRAY/FOG NOZZLE TO COOL CONTAINERS.
WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPLODE WHEN EXPOSED TO
EXTREME HEAT.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS. WEAR APPROVED NIOSH/MSHA RESPIRATOR. VENTILATE
AREA. REMOVE W/INERT ABSORBENT: SAND/KITTY LITTER. USE NON-SPARKING
TOOLS.

Handling and Storage Precautions:SECURE CLOSURES & KEEP CONTAINERS
UPRIGHT TO PREVENT LEAKAGE. DON'T STORE/USE NEAR HEAT >120F. AVOID
FREE FALL OF LIQUID. AVOID BREATHING VAPORS/MIST.
Other Precautions:AVOID CONTACT W/SKIN/EYES. DON'T FLAME CUT/BRAZE/WELD
W/O APPROVED RESPIRATOR & ADEQUATE VENTILATION. DON'T TAKE
INTERNALLY. KEEP CONTAINERS CLOSED/ISOLATE FROM IGNITION SOURCES.
CONTAINERS SHOULD BE GROUNDED WHEN POURING.

Respiratory Protection:IN OUTDOOR/OPEN AREAS & IN RESTRICTED VENTILATED
AREAS USE NIOSH/MSHA APPROVED MECHANICAL FILTER RESPIRATORS. IN
CONFINED AREAS, USE NIOSH/MSHA AIR-LINE RESPIRATORS & HOOD. WHEN
SPRAYING, USE A PARTIC ULATE RESPIRATOR.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST IN VOLUME & PATTER TO KEEP
THE TLVS BELOW LIMITS & BELOW LEL.
Protective Gloves:HEAVY DUTY RUBBER/NEOPRENE
Eye Protection:SAFETY EYEWEAR W/SPLASH GUARDS
Other Protective Equipment:BODY PROTECTION/RUBBER APRON/SAFETY GLASSES
W/SIDESHIELDS.
Work Hygienic Practices:WASH HANDS BEFORE SMOKING/EATING.
Supplemental Safety and Health
WORKERS ARE REQUIRED TO USE ONLY NON-FERROUS TOOLS. PAINT MUST BE
SHIPPED IN METAL CONTAINERS.

Boiling Pt:B.P. Text:212F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:COMPLETE
Appearance and Odor:LIQUID
Percent Volatiles by Volume:64-67

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:STATIC DISCHARGE, HEAT, SPARKS, OPEN
FLAME, ELECTRICAL EQUIPMENT, TEMP. >120F, FREEZING.
Hazardous Decomposition Products:CO2, CO

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL/STATE & FEDERAL
REGULATIONS THAT APPLY TO INCINERATION/SECURE LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.